Filter
Top Products
118 Removing and Installing Parts
8
Attach the power and data cables to the CD/DVD drive.
To locate the system board connector, see "System Board Components" on page 79.
9
Check all cable connections and fold cables out of the way to avoid blocking airflow between the fan
and cooling vents.
10
Replace the drive panel (see "Replacing the Drive Panel" on page 106).
11
Replace the computer cover (see "Replacing the Computer Cover" on page 127).
NOTICE: To connect a network cable, first plug the cable in to the network port or device and then plug it in to the
computer.
12
Connect your computer and devices to their electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for
drive operation.
1 power cable 2 data cable
2
1
book.book Page 118 Friday, October 27, 2006 4:02 PM