Filter
Top Products
88 Removing and Installing Parts
4
Press down the tab on the top of the card retainer at the appropriate card slot and pivot the card
retainer back through the chassis wall.
5
Remove the filler bracket or existing card (see "Removing PCI and PCI Express Cards" on page 85) to
create a card-slot opening.
6
Prepare the card for installation.
See the documentation that came with the card for information on configuring the card, making
internal connections, or otherwise customizing it for your computer.
7
Position the card so that it is aligned with the slot and the securing tab (if present) is aligned with the
securing slot.
NOTE: If the card is full-length, insert the card guide into the alignment slot on the fan bracket.
1 release tab 2 card retainer 3 alignment guide
4 fan bracket
1
2
3
4
book.book Page 88 Friday, October 27, 2006 4:02 PM