Filter
Top Products
102 Dell™ Printer Configuration Web Tool
Port Settings
Purpose:
To enable or disable printing connectors and management protocol features.
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the
settings, click Apply new settings to apply new settings.
Va lue s :
Ethernet*
1
Ethernet Settings Auto Detects Ethernet transmission rate
and the duplex settings
automatically.
10Base-T
Half-Duplex
Selects 10Base-T Half-Duplex as the
default value.
10Base-T
Full-Duplex
Selects 10Base-T Full-Duplex as the
default value.
100Base-TX Half-Duplex Selects 100Base-TX Half-Duplex as
the default value.
100Base-TX Full-Duplex Selects 100Base-TX Full-Duplex as
the default value.
Current Ethernet Settings Displays the current settings of Ethernet.
MAC Address Displays the MAC address of the printer.
Port Status LPD Specifies whether to enable LPD.
Port9100 Specifies whether to enable Port9100.
WSD Specifies whether to enable the WSD port.
Bonjour (mDNS) Specifies whether to enable the Bonjour (mDNS) feature.
E-Mail Alert Specifies whether to enable the E-Mail Alert feature.
SNMP Specifies whether to enable the SNMP.
*
1
This item is available only when the printer is connected with a wired network.