Filter
Top Products
Dell™ Printer Configuration Web Tool 93
Reports
Purpose:
To print the settings and history information of your printer.
Va lue s :
Printer Settings
The Printer Settings tab contains the System Settings, USB Settings, and Secure Settings pages.
System Settings
Purpose:
To configure the basic printer settings.
Va lue s :
Printer Settings Click Start to print the printer settings page.
Device Settings Click Start to print the device settings page.
Job History Click Start to print the Job History report.
Error History Click Start to print the Error History report.
Color Test Page Click Start to print the Color Test Page.
Power Saver Time - Sleep
*1
Specifies the time taken by the printer before it enters Sleep mode after it finishes a job.
Power Saver Time - Deep
Sleep
Specifies the time taken by the printer before it enters Deep Sleep mode after it goes into Sleep
mode.
Power Saver Time - Auto-Off
Timer
*2
Specifies the time it takes to automatically turn off the printer after it has entered Deep Sleep
mode.
Fault Time-Out Specifies the time taken by the printer before it cancels jobs that stop abnormally. The print job is
cancelled if it times out.
Job Time-Out Specifies the amount of time that the printer waits for data to arrive from the computer. The print
job is cancelled if it times out.
mm / inch
*3
Specifies the measurement unit displayed after the numeric value on the operator panel.
Default Paper Size Specifies the default paper size.
Disable printing with larger
paper size
*4
Specifies whether to print jobs if the paper set in the tray of the printer is larger than the paper
size set in the printer driver (the paper size does not have to match).
Auto Log Print Specifies if a job history needs to be printed after every 10 jobs.
Low Toner Alert Msg Alerts you if the toner is low.
Panel Language Used to set the language on the operator panel.
*
1
Enter 5 in Sleep to put the printer in the Sleep mode five minutes after it finishes a job. This uses less energy, but requires more
warm-up time for the printer. Enter 5 if your printer shares an electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate with minimum
warm-up time. Select a value between 5 and 30 minutes for the Sleep mode if you want a balance between energy consumption and a
shorter warm-up period.
The printer automatically returns to the standby mode from the Sleep mode when it receives data from the computer. You can also
return the printer to the standby mode by pressing any button on the operator panel.
*
2
Auto-Off Timer feature is available only in certain regions.
*
3
The default for mm/inch and Default Paper Size vary depending on country-specific factory default.
*
4
Disable printing with larger paper size is available only in the Dell Printer Configuration Web Tool and the Tool Box.