Filter
Top Products
120 Understanding the Tool Box Menus
TCP/IP Settings
Purpose:
To configure TCP/IP settings.
Va lue s :
Network Settings
Purpose:
To display the server settings of the Dell Printer Configuration Web Tool.
NOTE: When the printer is connected to the USB port, this setting cannot be displayed.
Va lue s :
IP Address Mode AutoIP Automatically sets the IP address.
DHCP Uses DHCP to set the IP address.
BOOTP Uses BOOTP to set the IP address.
RARP Uses RARP to set the IP address.
Manually Set Manually sets the IP address.
IP Address Manually sets the IP address allocated to the printer.
Subnet Mask Manually sets the subnet mask.
Gateway Address Manually sets the gateway address.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Restart printer to apply new settings Click Restart printer to apply new settings to apply the changes.
Print Server
Settings
Display Click to display the server settings for the Dell Printer Configuration Web Tool.
Display of Dell
Configuration Web
Tool
Off Turns off the display of the server settings for the Dell Printer Configuration Web
Tool.
On Turns on the display of the server settings for the Dell Printer Configuration Web
Tool.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Restart printer to apply new settings Click Restart printer to apply new settings to apply the changes.