Filter
Top Products
Understanding the Tool Box Menus 119
Reset Defaults
Purpose:
To initialize NVM (non-volatile memory) for system parameters. After executing this function and rebooting the
printer, all the menu parameters, except the parameters for the network, are reset to their default values.
For details, see "Resetting Defaults" on page 123.
Va lue s :
Non-Dell Toner
Purpose:
To use toner cartridge of another manufacturer.
NOTE: Using non-Dell™-brand toner cartridges may make some printer features unusable, reduce print quality and decrease
the reliability of your printer. Dell recommends only new Dell-brand toner cartridges for your printer. Dell does not provide
warranty coverage for problems caused by using accessories, parts, or components not supplied by Dell.
NOTE: Before you use toner cartridge of another manufacturer, be sure to restart the printer.
Va lue s :
BTR Refresh Mode
Purpose:
To execute counter measures for curling/separating discharge of the paper.
Va lue s :
Start Click to initialize the system parameters.
Non-Dell Toner Off Does not use toner cartridge of another manufacturer.
On Use toner cartridge of another manufacturer.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Restart printer to apply new settings Click Restart printer to apply new settings to apply the changes.
BTR Refresh Mode Off Does not automatically execute counter measures for curling/separating discharge of
the paper.
On Automatically executes counter measures for curling/separating discharge of the paper.
Apply New Settings After you complete the settings, click Apply New Settings to apply the changes.
Restart printer to apply new settings Click Restart printer to apply new settings to apply the changes.