Filter
Top Products
62 Installing System Components
• Peripheral interposer board
• Fan interposer board
• System board
• Power distribution board
• Processor expansion module board
Recommended Tools
You may need the following items to perform the procedures in this section:
• Key to the system keylock
• #2 Phillips screwdriver
• T10 Torx driver
• Small flat-blade screwdriver
• Wrist grounding strap
Inside the System
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
In Figure 3-1, the bezel, system cover, processor expansion module, and
cooling shroud assembly are removed to provide an interior view of the
system.
NOTICE: Do not remove the cooling shroud assembly if the system is turned on.
The cooling shroud assembly must be installed to direct the airflow from the fans.