Filter
Top Products
84 Installing System Components
Figure 3-14. RAC Card Connectors
7
Reinstall the storage controller card.
8
Reconnect all cables to the storage controller card.
9
Close the system. See "Closing the System" on page 66.
10
Reconnect the system and peripherals to their power sources, and turn
them on.
11
Enter the System Setup program and verify that the setting for the Boot
Sequence has changed to reflect the presence of the RAC card. See "Using
the System Setup Program" on page 43.
12
Exit the System Setup program and reboot the system.
When the system boots, the
Remote Access Controller
Detected
message displays and the option ROM and firmware
information for the RAC displays.
Press <Ctrl><e> to enter the RAC configuration screen. See the RAC
documentation for information on configuring and using the RAC.
1 RJ-45 RAC NIC connector 2 44-pin MII cable connector
3 50-pin management cable connector
1
3
2