Filter
Top Products
88 Installing System Components
SD Memory Card
You can install an optional SD memory card in a connector on the system
board.
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1
Turn off the system, including any attached peripherals, and disconnect
the system from its electrical outlet.
2
Open the system. See "Opening the System" on page 65.
3
Locate the SD card connector on the system board (see Figure 6-1).
4
Insert the SD card connector into the connector onto the board. See
Figure 3-17.
Figure 3-17. Installing an SD Card
1 SD card 2 SD card connector
1
2