Filter
Top Products
4-6 Dell Dimension XPS H233 and XPS H266 Systems Service Manual
5.25-Inch Drive
Figure 4-6. 5.25-Inch Drive Removal
To remove a drive from a 5.25-inch drive bay, follow these steps:
1. Remove the front bezel.
2. Remove the drive cage and drives as an assembly.
3. Remove the three drive-mounting screws, and slide the drive out of the
bay.
When you replace a drive, be sure to set the jumpers on the replacement drive
the same as the jumpers on the drive you removed. For additional information
about jumper settings on EIDE drives, see “EIDE Subsystem” in Chapter 1.
drive-mounting
screws (3)