Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
between 10 and 1,000,000 seconds.
<Disabled>
Allows you to set IGMP snooping globally on the switch
by selecting Enabled or Disabled.
IGMP Snooping:
Switch GVRP
Allows the Group VLAN Registration Protocol (GVRP) to
be globally Enabled or Disabled on the switch.
:<Disabled>
Switch GMRP
Allows the Group Multicast Registration Protocol
(GMRP) to be globally Enabled or Disabled on the
switch.
:<Disabled>
Upper Threshold
for Master Ports:
[128]Kpps
This is the number of thousands Broadcast/Multicast
packets per second received by the switch – on one of
the Master Ports – that will trigger the switch’s reaction
to a Broadcast/Multicast storm.
Upper Threshold
for Module Ports:
[128]Kpps
This is the number of thousands Broadcast/Multicast
packets per second received by the switch – on one of
the module ports – that will trigger the switch’s reaction
to a Broadcast/Multicast storm.
Broadcast Storm
Mode:<Disabled>
This field can be toggled between Enabled and Disabled
using the space bar. This enables or disables, globally,
the switch’s reaction to Broadcast storms, triggered at
the threshold set above.
Multicast Storm
Mode:<Disabled>
This field can be toggled between Enabled and Disabled
using the space bar. This enables or disables, globally,
the switch’s reaction to Multicast storms, triggered at
the threshold set above.
Switch Settings − Layer 3 IP Routing Protocol Settings
The Layer 3 Switch Settings menu only allows the available multicasting
protocols to be enabled or disabled − globally − on the switch.
The multicasting and routing protocols are setup under the Multicasting and the Layer 3 IP
Networking menus − both of which are under the Advanced Setup heading of the Main Menu.
To access the Layer 3 IP Routing Protocol Settings screen, highlight Switch Settings from the Main
Menu. Then highlight Layer 3 IP Routing Protocol Settings on the Switch Settings menu and press
Enter:
109