Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
If the port is attached to a device that is not IEEE 802.1Q VLAN compliant (VLAN-tag unaware), then
the port should be set to Untagged (no marker in the port’s Tag click-box).
If the port is attached to a device that is IEEE 802.1Q VLAN compliant, (VLAN-tag aware), then the port
should be set to Tagged (has a marker in the port’s Tag click-box).
Click Apply to make the additions/deletions effective for the current session. To enter the IP Interfaces
into non-volatile RAM, use the Save Changes window on the Maintenance menu.
To configure the member ports of an 802.1Q VLAN:
Go to the Configuration menu, select VLANs, choose 802.1Q Port Settings, and then click Port VLAN
(PVID):
Figure 7-21. Port VLAN ID (PVID) window
The following field can be set:
Parameter Description
PVID
A Port VLAN Identifier is a
classification mechanism that
associates a port with a specific
VLAN and is used to make
forwarding decisions for untagged
packets received by the port. For
example, if port #2 is assigned a
PVID of 3, then all untagged packets
received on port #2 will be assigned
to VLAN 3. This number is generally
the same as the VID# number
assigned to the port in the Edit
802.1Q VLANs menu above.
Each port can be configured to use an ingress filter.
To configure the member ports of an 802.1Q VLAN to use and ingress filter:
210