Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
applies only when the destination field is OSPF.
Metric:[ ]
Allows the entry of an OSPF interface cost. This is
analogous to a Hop Count in the RIP routing protocol.
Multicasting
Layer 2 Multicast Setup
To setup Multicasting on the switch, when the switch is in Layer 2 operating mode, highlight
Multicasting from the Main Menu and press Enter.
Figure 6-50. Multicasting Menu
IGMP Snooping Settings
To configure IGMP Snooping, highlight IGMP Snooping Settings from the Multicasting Menu and
press Enter.
Figure 6-51. IGMP Snooping Settings screen
IGMP Snooping can be globally enabled or disabled from the IGMP Snooping Settings screen.
133