Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Table 6-3. VLAN Example – Assigned Ports
In this case, 6 IP interfaces are required, so a CIDR notation of 10.32.0.0/11 (or a 11-bit) addressing
scheme will work. This addressing scheme will give a subnet mask of
11111111.11100000.00000000.00000000 (binary) or 255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above example would give 6 network addresses and 6
subnets.
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address
for an IP interface on the switch.
For this example, we have chosen the next IP address above the network address for the IP interface’s
IP Address:
VLAN Name VID Network Number IP Address
System (default) 1 10.32.0.0 10.32.0.1
Engineer 2 10.64.0.0 10.64.0.1
Marketing 3 10.96.0.0 10.96.0.1
Finance 4 10.128.0.0 10.128.0.1
Sales 5 10.160.0.0 10.160.0.1
Backbone 6 10.192.0.0 10.192.0.1
Table 6-4. VLAN Example – Assigned IP Interfaces
The 6 IP interfaces, each with an IP address (listed in the table above), and a subnet mask of
255.224.0.0 can be entered into the Setup IP Interface menu.
To setup IP Interfaces on the switch:
Highlight Layer 3 IP Networking from the Main Menu and press Enter.
Figure 6-35. Layer 3 - Main Menu
Highlight Layer 3 IP Networking from the Main Menu and press Enter.
119