Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Advanced Setup
Changing switch operation mode setting changes some of the menus and configuration options for the
Advanced Setup of the switch. The configuration data for each mode is, however, saved when the
switch’s operating mode is changed.
Configuring VLANs
The switch allows the assignment of an IP interface to each VLAN, in IP
Routing mode. The VLANs must be configured prior to setting up the IP
interfaces.
VLANs by Switch Operating Mode
To create a new 802.1Q VLAN:
The VLAN menu adds an entry to edit the VLAN definitions and to configure the port settings for IEEE
802.1Q VLAN support. Go to the Configuration menu, select VLANs, and click 802.1Q Static VLANs:
Figure 7-18. 802.1Q Static VLANs window
To delete an existing 802.1Q VLAN, click the X icon in the Delete column that corresponds to the
VLAN you want to delete.
To create a new 802.1Q VLAN, click the New hyperlink:
Figure 7-19. 802.1Q Static VLANs Entry Settings – Add window
To edit an existing 802.1Q VLAN, click the Hand icon:
208