Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
<Disabled>
dictate, globally, the switch’s reaction to Broadcast storms
and/or Multicast storms, triggered at the threshold set
below.
Upper Threshold for
Base ports <128>
This is the number of thousands Broadcast/Multicast
packets per second received by the switch – on one of the
Master Ports – that will trigger the switch’s reaction to a
Broadcast/Multicast storm.
Upper Threshold for
Module ports <128>
This is the number of thousands Broadcast/Multicast
packets per second received by the switch – on one of the
module ports – that will trigger the switch’s reaction to a
Broadcast/Multicast storm.
GVRP <Disabled>
Allows the Group VLAN Registration Protocol (GVRP) to be
globally Enabled or Disabled on the switch.
GMRP <Disabled>
Allows the Group Multicast Registration Protocol (GMRP)
to be globally Enabled or Disabled on the switch.
Switch Settings − Layer 3 IP Routing Protocol Settings
The Layer 3 Switch Settings menu only allows the available multicasting
protocols to be enabled or disabled − globally − on the switch.
The multicasting and routing protocols are setup under the Multicasting and the Configure Layer 3 −
IP Networking menus.
To access the Layer 3 IP Routing Protocol Settings window, go to the Configuration menu, select
Switch Settings, and then click Layer 3 IP Routing Protocol Settings:
Figure 7-17. Layer 3 IP Routing Protocol Settings window
The following fields can then be set:
Parameter Description
DVMRP <Disabled>
Allows the Distance-Vector Multicast
Routing Protocol (DVMRP) to be
Enabled or Disabled globally on the
206