Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
To add a new spanning tree group, click the New icon:
Figure 7-58. STP Group Settings − Add window
The new spanning tree group will be identified by the name entered in the Group Name field. The group
member ports will be identified by the dots in the click-boxes below the port numbers.
To edit an existing spanning tree entry, click the Hand icon:
Figure 7-59. STP Group Settings − Edit window
To view the STP Port Settings table:
Click the STP Port Settings link on the Spanning Tree Protocol menu:
Figure 7-60. STP Port Settings window
In addition to setting Spanning Tree parameters for use on the switch level, the DES-3326 allows for
the configuration of groups of ports, each port-group of which will have its own spanning tree, and will
require some of its own configuration settings. An STP Group will use the switch-level parameters
entered above, with the addition of Port Priority and Port Cost.
240