Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
• Flow Control None
Make sure the terminal or PC you are using to make this connection is configured to match these
settings.
If you are having problems making this connection on a PC, make sure the emulation is set to VT-
100. If you still don’t see anything, try hitting <Ctrl> + r to refresh the screen.
IP Addresses and SNMP Community Names
Each Switch must be assigned its own IP Address, which is used for communication with an SNMP
network manager or other TCP/IP application (for example BOOTP, TFTP). The switch’s default IP
address is 10.90.90.90. You can change the default Switch IP Address to meet the specification of your
networking address scheme.
The switch is also assigned a unique MAC address by the factory. This MAC address cannot be
changed, and can be found from the initial boot console screen – shown below.
Figure 5-1. Boot screen
The switch’s MAC address can also be found from the console program under the Switch Information
menu item, as shown below.
Figure 5-2. Switch Information screen
25