Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Figure 7-51. Setup Static Unicast MAC Forwarding window
The following fields can be set:
Parameter Description
MAC Address
Allows the entry of the MAC address
of an end station that will be entered
into the switch’s static forwarding
table.
VID
Allows the entry of the VLAN ID (VID)
of the VLAN the MAC address below
is a member of.
Port
Allows the entry of the port number
on which the MAC address entered
above resides.
IP Forwarding
With the switch in Layer 3 Operation mode, entries into the switch’s forwarding table can be made
using both MAC addresses and IP addresses. Static IP forwarding is accomplished by the entry of an IP
address into the Static IP Routing table.
Static Address Resolution Protocol (ARP) entrees can also be made from the Forwarding menu.
Click the Static/Default Routes link on the IP Forwarding menu (under Configuration →
Forwarding):
Figure 7-52. Static/Default Routes window
To delete an existing static/default route, click the X icon under the Delete column corresponding to
the entry you want to delete.
To add a new static/default route, click the New icon:
236