Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Highlight one of the two Load Factory Default Configuration entries and press Enter. A confirmation
screen will appear. Press Y for Yes and press Enter.
The factory defaults for the DES-3326 are listed in Appendix D of this manual.
Reboot
The DES-3326 has several reboot options.
To reboot the switch from the console:
Highlight Reboot from the Main Menu and press Enter.
Figure 6-110. System Reboot menu
The reboot options are as follows:
Reboot simply restarts the switch. Any configuration settings not saved using Save Changes from the
Main Menu will be lost. The switch’s configuration will be restored to the last configuration saved in
NV-RAM.
Save Configuration & Reboot saves the configuration to NV-RAM (identical to using Save Changes)
and then restarts the switch.
Reboot & Load Factory Default Configuration restarts the switch using the default factory
configuration. All configuration data will be lost.
Reboot & Load Factory Default Configuration Except IP Address restarts the switch using the
default factory configuration, except the user configured IP address will be retained. All other
configuration data will be lost.
A confirmation screen will appear:
183