Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
Figure 7-10. IP Address window
The switch’s factory default IP address is 10.90.90.90 with a subnet mask of 255.0.0.0
and a default gateway of 0.0.0.0.
To manually assign the switch’s IP address, subnet mask, and default gateway
address:
Enter the appropriate IP address and subnet mask.
If you want to access the switch from a different interface from the one it is installed on, enter the IP
address of the gateway. If you will manage the switch from the interface on which it is installed, you
can leave the default address in this field.
To use the BOOTP or DHCP protocols to assign the switch an IP address, subnet mask, and
default gateway address:
Use the Get IP From: <Manual> pull-down menu to choose from Manual, BOOTP, or DHCP. This selects
how the switch will be assigned an IP address on the next reboot (or startup).
Note: The BOOTP and DHCP protocols are only available when the switch is in Layer 2 mode.
198