Filter
Top Products
DES-3326 Layer 3 Fast Ethernet Switch User’s Guide
The following fields can be set:
Parameter Description
Action:<Add/Modify
>
This field can be toggled between
Add/Modify and Delete using the
space bar.
VID: [ ]
Allows the entry of the VLAN ID (VID)
of the VLAN to which the MAC
address below is a member of.
MAC Address:[ ]
Allows the entry of a MAC address to
be filtered from the switch. This
address must be a unicast MAC
address.
Source/Destination:
<Scr.>
This field can be toggled using the
space bar between Src. (Source), Dst.
(Destination), and Either,
corresponding to whether the MAC
address entered above will be
transmitting packets (a source),
receiving packets (a destination) or
both (either).
Layer 3 (IP Routing) Filtering
With the switch configured to Layer 3 Operation mode, both MAC and IP addresses can be entered into
the filtering table, using their respective entry menus. To enter an address, highlight Filtering from the
Main Menu and press Enter.
Figure 6-66. Filtering Menu – Layer 3
147