Emerson M820B Power Supply User Manual


 
User Instructions UM1M820BNA
Spec No. 1M820BNA (Model M820B) Issue AH, March 4, 2013
Spec No. 1M820DNA (Model M820D)
Chapter 3. Local Display Menus 97
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
" Rect #1" Parameter Settings:
Rectifier ID: Sets the rectifier position in the system.
Rect Phase: Indicates the phase connected to the rectifier input.
Battery
Basic Menu
Menu Navigation: Main Menu / Settings / Battery / Basic
Note: For WEB Interface; menu items are found under Device Information / Battery Group /
Settings Tab.
"Basic" Parameter Settings:
Num Batt Shunts: Sets the number of battery shunts in the system.
Calc Batt Curr: Selects whether or not the ACU+ calculates the battery current in the case
of no battery shunt (load shunt required).
Low Capacity Pt: Battery low capacity alarm set point.
Current Limited: Enables or disables battery charge current limit.
BTRM TempSensor: Sets the BTRM (Battery Thermal Runaway Management)
temperature sensor. Note that this temperature sensor MUST be set as a battery
temperature sensor. Select "None", or the temperature probe (SMTemp8 T8 / ... /
SMTemp8 T1 / ... / SMTemp1 T8 / ... / SMTemp1 T1 / EIB T2 / EIB T1 / IB2 T2 / IB2 T1).
You can also select Maximum or Average which takes the maximum or average reading of
the temperature probes (any of SMTemp8 T8 / ... / SMTemp8 T1 / ... / SMTemp1 T8 / ... /
SMTemp1 T1 / EIB T2 / EIB T1 / IB2 T2 / IB2 T1) set as battery temperature probes. When
used with an SM-BRC, you can select to average the SM-BRC temperature probe
readings.
Note: The BTRM sensor is the sensor which is used for the High Temperature Disconnect
(HTD) Feature.
BTRM Temp High2: Allows you to set a high BTRM temperature alarm 2 point. If battery
temperature exceeds the “BTRM Temp High2” setting, system voltage is lowered to the
“BTRM Voltage” setting (if BTRM Action is enabled).
BTRM Temp High1: Allows you to set a high BTRM temperature alarm 1 point.
BTRM Action
Disabled: Disables the Battery Thermal Runaway Management feature.
Lower Voltage: Sets the Battery Thermal Runaway Management feature to reducing
the output voltage when battery temperature exceeds the BTRM Temp setting.
BTRM Voltage: Voltage that the system is set to when battery temperature
exceeds the “BTRM Temp High2” setting.
ABCL Point: The ABCL (Active Battery Charge Current Limit) point is the maximum Li-Ion
battery charging current setting.
Charge Menu
Menu Navigation: Main Menu / Settings / Battery / Charge
Note: For WEB Interface; menu items are found under Device Information / Battery Group /
Settings Tab.
"Charge" Parameter Settings:
Float Voltage: Float Charge output voltage setting.
EQ Voltage: Equalize Charge output voltage setting.