Emerson M820B Power Supply User Manual


 
User Instructions UM1M820BNA
Spec No. 1M820BNA (Model M820B) Issue AH, March 4, 2013
Spec No. 1M820DNA (Model M820D)
Chapter 4. WEB Interface Menus 145
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
4.7.9 Retrieve ‘SettingParam.run’ File Sub-Menu
A file, named SettingParam.run, is automatically created by the Controller whenever a User makes
changes to any parameter settings via the LCD or WEB interface.
You can upload a SettingParam.run file into your computer and then download the file to another
Controller (refer to “4.7.8 Download Sub-Menu”), so that other Controllers can have the same parameters.
Click on the “Retrieve File” button to save the file named "SettingParam.run" to you hard drive.
Note: It is strongly recommended that you save a copy of the SettingParam.run file whenever you
customize any parameter settings. Then, if you ever replace the Controller or perform a "Reload
Config" procedure, you can restore your customized settings by downloading the previously saved
SettingParam.run file back into the Controller.
Note: Ensure Internet Explorer security settings are set to enable a file to be downloaded.
To aid in file management, you may change the name of the SettingParam.run file. The new name can
use alpha and numeric characters preceding the original SettingParam.run name (the end of the new file
name must always be SettingParam.run; for example, an acceptable filename would be
seville4SettingParam.run).