Emerson M820B Power Supply User Manual


 
User Instructions UM1M820BNA
Spec No. 1M820BNA (Model M820B) Issue AH, March 4, 2013
Spec No. 1M820DNA (Model M820D)
Chapter 2. Operation 49
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Table 4
Full Alarm Name - WEB
(Abbreviated
Alarm Name - LCD)
Alarm Description
Action to Correct
SMTemp8 Temp8 High 2
(SMTemp8 T8 Hi2)
Temperature sensor #8 (connected to
SM-Temp 8 and set as Battery)
sensing temperature higher than high
temperature threshold 2.
Check why temperature is high or low.
SMTemp8 Temp8 High 1
(SMTemp8 T8 Hi1)
Temperature sensor #8 (connected to
SM-Temp 8 and set as Battery)
sensing temperature higher than high
temperature threshold 1.
SMTemp8 Temp8 Low
(SMTemp8 T8 Low)
Temperature sensor #8 (connected to
SM-Temp 8 and set as Battery)
sensing temperature lower than low
temperature threshold.
BTRM Temp High 2
(BTRM Temp High2)
Battery temperature (monitored by the
sensor set as BTRM) is higher than
the BTRM Temperature Alarm 2
threshold.
Check why temperature is high or low.
BTRM Temp High 1
(BTRM Temp High1)
Battery temperature (monitored by the
sensor set as BTRM) is higher than
the BTRM Temperature Alarm 1
threshold.
BTRM Sensor Fault
(BTRM TempFault)
BTRM temperature sensor failure.
Replace temperature sensor.
Li-Ion Battery Lost
(LiBatt Lost)
A Li-Ion Battery cannot be detected by
the Controller.
Check communications cables.
Clear the Li-Ion Battery Lost alarm.
1 Li-Ion Battery Disconnect
(1 LiBattDiscon)
One (1) Li-Ion Battery is disconnected.
Check why the Li-Ion Battery
disconnected.
2+Li-Ion Battery Disconnect
(2+LiBattDiscon)
Two (2) or more Li-Ion Batteries are
disconnected.
Check why the Li-Ion Batteries
disconnected.
1 Li-Ion Battery No Reply
(1 LiBattNoReply)
One (1) Li-Ion Battery has lost
communications with the Controller.
Check communications cables.
Clear the Li-Ion Communication Fail
alarm.
2+Li-Ion Battery No Reply
(2+LiBattNoReply)
Two (2) or more Li-Ion Batteries have
lost communications with the
Controller.
Check communications cables.
Clear the Li-Ion Communication Fail
alarm.
Inventory Update In Process
(InventUpdating)
Li-Ion Battery inventory being
updated.
--
ABCL is active
(ABCL Active)
Active Battery Charge Current Limit is
active.
--