Emerson M820B Power Supply User Manual


 
UM1M820BNA User Instructions
Issue AH, March 4, 2013 Spec No. 1M820BNA (Model M820B)
Spec No. 1M820DNA (Model M820D)
58 Chapter 2. Operation
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Table 4
Full Alarm Name - WEB
(Abbreviated
Alarm Name - LCD)
Alarm Description
Action to Correct
Line CA Over Voltage 1
(L-CA Over Volt1)
Voltage between Line C and Line A is
higher than the High Line Voltage CA
Alarm threshold.
Check why voltage is high.
Line CA Over Voltage 2
(L-CA Over Volt2)
Voltage between Line C and Line A is
higher than the Very High Line Voltage
CA Alarm threshold.
Line CA Under Voltage 1
(L-CA UnderVolt1)
Voltage between Line C and Line A is
lower than the Low Line Voltage CA
Alarm threshold.
Check why voltage is low.
Line CA Under Voltage 2
(L-CA UnderVolt2)
Voltage between Line C and Line A is
lower than the Very Low Line Voltage
CA Alarm threshold.
Phase A Over Voltage 1
(PH-A Over Volt1)
Phase A voltage is above over voltage
1 threshold.
Check why voltage is high.
Phase A Over Voltage 2
(PH-A Over Volt2)
Phase A voltage is above over voltage
2 threshold.
Phase A Under Voltage 1
(PH-A UnderVolt1)
Phase A voltage is below under
voltage 1 threshold.
Check why voltage is low.
Phase A Under Voltage 2
(PH-A UnderVolt2)
Phase A voltage is below under
voltage 2 threshold.
Phase B Over Voltage 1
(PH-B Over Volt1)
Phase B voltage is above over voltage
1 threshold.
Check why voltage is high.
Phase B Over Voltage 2
(PH-B Over Volt2)
Phase B voltage is above over voltage
2 threshold.
Phase B Under Voltage 1
(PH-B UnderVolt1)
Phase B voltage is below under
voltage 1 threshold.
Check why voltage is low.
Phase B Under Voltage 2
(PH-B UnderVolt2)
Phase B voltage is below under
voltage 2 threshold.
Phase C Over Voltage 1
(PH-C Over Volt1)
Phase C voltage is above over voltage
1 threshold.
Check why voltage is high.
Phase C Over Voltage 2
(PH-C Over Volt2)
Phase C voltage is above over voltage
2 threshold.
Phase C Under Voltage 1
(PH-C UnderVolt1)
Phase C voltage is below under
voltage 1 threshold.
Check why voltage is low.
Phase C Under Voltage 2
(PH-C UnderVolt2)
Phase C voltage is below under
voltage 2 threshold.