Filter
Top Products
110
RiverMaster Administrator’s Guide
Adding Corporate ISPs Chapter 5
Controlling Remote User Dialing & Access
13 Click the ISP Properties tab.
The ISP Properties display will appear as show in Figure 61.
Figure 61 ISP Properties
14 In the IP Address field, enter the IP Address of the dial-up server.
If the ISP did not supply this address, you can leave this field blank.
15 In the Primary DNS and Secondary DNS fields, enter the IP
addresses of DNS servers used for name resolution.
ISPs normally supply both primary and secondary DNS addresses.
For corporate dial-up connections into your network, you must
specify at least the primary DNS server’s address.
16 In the Primary WINS and Secondary WINS fields, enter the IP
addresses of WINS servers on your network.
ISPs do not typically use WINS for name resolution. If you employ
WINS on your network, enter at least one WINS server address (in
the Primary WINS field).
17 In the Default Gateway field, enter the IP address of the gateway
used to forward packets to other subnets or networks.
Click here to browse
the network for the
folder where the
script is stored
Type the login script
full path or just the
View
View messages
here
name here