Filter
Top Products
RiverMaster Administrator’s Guide
85
Chapter 4 Adding an Authorization Plug-In
Setting Up Aurorean Services
5 Optionally, specify a value in the Num Threads field.
This function allows the specified number of users to simultaneously
log in without delay. The range of threads that can be set is 1 to 100,
with a default value set to 10.
NOTE
Do not set Num Threads to a 0 (zero) value for a RADIUS plug-in. This
will cause user login problems. You may set the value to zero for the
Enterasys Authentication plug-in.
6 To make this plug-in the default authorization method, place a check
next to Default Plug-In.
7 ClickonRadiusPlug-In.
8 In the Server Address field, enter the IP address or DNS name of the
RADIUS server.
9 In the Shared Secret field, type the same shared secret password you
entered on the RADIUS server.
For more information on shared secrets, refer to the documentation
supplied with your RADIUS server.
10 Leave the Authentication Port and Accounting Port fields set to their
default values.
These values specify UDP port numbers and match industry
standards for RADIUS.