Filter
Top Products
RiverMaster Administrator’s Guide 137
Chapter 6
Creating a New Group
Managing Users & Groups
Modifying User & Group Information
After a user or group has been created, you can modify any setting associated
with the user or group name, including group policies, IP address allocation
methods, and user passwords. Although you cannot rename a user or group,
you can accomplish the same goal by removing the user or group and then
reentering the information using a new name.
To modify user or group information, perform the following steps:
1
Open the Manage Users and Groups pullout.
2
Click on the appropriate icon in the lower left corner of the pullout to
select the Group or User view.
3
Select the user or group name from the list of Current Users or
Current Groups.
4
Click Modify.
5
Change the settings for the user or group as required.
6
Do one of the following:
– Click Update to put your changes into effect.
– Click Cancel to return the user or group information to its
original state.
The modified information is immediately saved on the APS.
NOTE
Any changes made to Group Policies are conveyed to users automatically
through Client Synchronization regardless of whether Data or Software
Synchronization are enabled or not.