Filter
Top Products
RiverMaster Administrator’s Guide 7
Chapter 1
Installing the Application
Installing RiverMaster Software
5
Type the default user name (
netadmin
) and password (
netadmin
)
and click OK.
For example, the primary APS name and its IP address is displayed in
the RiverMaster Login window in Figure 3. When the RiverMaster
application starts, the main interface appears as shown in Figure 4.
Figure 3 RiverMaster Login Window
NOTE
To prevent unauthorized RiverMaster access, Enterasys Networks
recommends that you immediately create a new administrator account in
the Admin group and delete the default login account. Refer to Chapter 6
for instructions on adding and deleting user accounts.
When you start RiverMaster, the application immediately attempts to detect
and communicate with the Aurorean Policy Server and Aurorean Network
Gateway located within the same corporate network. Depending upon the
amount of remote client activity occurring on the VPN, RiverMaster may
need up to a minute to detect and synchronize with both servers.
CAUTION
If you want to configure a connection to a second APS after having
already configured a connection to only one server, you must first delete
the config.irx file in the C:\Program Files\Indus River
Networks\RiverMaster directory on the RiverMaster PC. Then, when
you click on the RiverMaster desktop icon, the Identify your
Aurorean VN Environment window will appear as described on page 5.