Filter
Top Products
RiverMaster Administrator’s Guide 41
Chapter 3
General Aurorean Network Gateway Settings
Configuring an ANG-3000/7000
10
In the Primary WINS and Secondary WINS fields, enter the IP
addresses of WINS servers on your network.
If your remote clients use standard Microsoft Dial-Up Networking
(DUN) on the corporate network, you must complete these fields to
enable browsing and communication with other devices in the
Network Neighborhood.
11
Click the NAT tab.
The tab page for the Network Address Translation (NAT) server
address appears as shown in Figure 21.
Figure 21 NAT Server Address
12
In the NAT field, enter the IP Address of the NAT server on your
network.
The IP address you enter here is the address that Aurorean users will
receive in the installation kit as their destination address - the alias
external IP address of the ANG.
Click here to
open the
Configuration
pullout