Filter
Top Products
RiverMaster Administrator’s Guide 53
Chapter 3
Virtual Subnetting
Configuring an ANG-3000/7000
Figure 29 IPX Subnet Configuration for Remote Clients
6
In the IPX Virtual Network Number field, enter an IPX network
number to be used by all remote clients. This number must be unique.
The network number must be between 1 and 8 hexadecimal digits (1
to FFFFFFFD). This network number will be attached to all IPX
frames received from remote clients.
NOTE
Zero (0) and FFFFFFFF addresses are invalid due to NetWare restrictions.
FFFFFFFE is reserved for the default route.
7
Click Apply to save your changes.
To return the parameters to their original settings without saving
your changes, click Reset.
Click here to
access the
Gateway
configuration
windows
Click here to
open the
Configuration
pullout