Filter
Top Products
Introduction
2
Windows System Requirements
To use your printer and its software with a PC, your system
should have:
◗ An IBM
®
compatible PC with at least a 386/25 MHz or
faster processor
◗ Microsoft
®
Windows 3.1, Windows for Workgroups
™
3.1,
or Windows 95
◗ At least 8MB of RAM (more for Windows 95)
◗ At least 20MB of free hard disk space for storing images
(40MB or more is recommended)
◗ VGA, Super VGA, or better display adapter and monitor
◗ A shielded, twisted-pair parallel cable (6 to 10 feet long) to
connect your computer to the printer; the cable must have
a D-SUB, 25-pin, male connector for your computer and a
36-pin, Centronics
®
compatible connector for the printer.
Macintosh System Requirements
To use your printer and its software with a Macintosh, your
system should have:
◗ Any Macintosh or Power Macintosh model except the
Macintosh +, Macintosh 512, Macintosh Classic,
Macintosh SE, or PowerBook
™
100
◗ System 7.1 or later
◗ At least 8MB of RAM (16MB or more is recommended)
◗ At least 20MB of free hard disk space for storing images
(40MB or more is recommended)
◗ VGA (8 bit, 640
× 480) or better display and monitor
◗ Standard Apple
®
System Peripheral-8 cable or equivalent
(RS-422, 8-pin mini DIN male/male, Belkin F2V024
recommended)
easint.fm5 Page 2 Monday, November 25, 1996 4:32 PM