Filter
Top Products
Troubleshooting
6-12
Printing is too slow.
Your printer switches to the modem port or won’t confirm on the
printer port (Macintosh).
Your printer icon doesn’t appear in the Chooser (Macintosh).
Possible cause Solution
Your printer software
options are set incorrectly.
For faster printing, try the following:
• Set
Print Quality to Economy.
• Turn
MicroWeave off.
• Turn
High Speed on.
• Choose
No Halftoning.
• Choose
Black ink.
See Chapters 1 and 3 for more information.
Your system doesn’t have
enough resources.
• Clear space on your hard disk drive or run a defragmentation
utility.
• Don’t run too many applications at the same time.
• Turn off virtual memory.
• Increase your system’s memory (RAM)
You’re using background
printing on a Macintosh.
Choose
Get Info from the File menu and increase the Memory
Requirements for EPSON Monitor2 or turn off background
printing.
Your port settings are
incorrect in Windows 95.
Change your default spool directory and disable port settings as
described in Chapter 4.
Possible cause Solution
Your Macintosh has
extension confilcts.
Make sure AppleTalk is inactive. In the Extensions Manager,
disable the AppleShare, FileShare, and PrinterShare extensions.
Set your printer and any unused Apple printers to the printer port.
Then restart your system.
You’re using an AppleTalk
cable.
Make sure you’re using a standard Apple System Peripheral-8
cable. See the Introduction for more information.
Possible cause Solution
Your Macintosh has
extension confilcts.
Disable Quick Draw GX in the Extensions Manager. Make sure
EPSON Monitor2 and EPSON Stylus Color are enabled, and then
restart your Macintosh.
easch6.fm5 Page 12 Tuesday, January 14, 1997 9:48 AM