Filter
Top Products
Technical Specifications
B-7
Control Panel Settings
You can change the following “default” settings from the printer’s
control panel:
Changing control
panel settings
Follow these steps to change the settings listed above:
1. Make sure the printer is turned off and has paper loaded.
2. Hold down the
X color cleaning button and press the power
button. The printer prints a summary of instructions for
changing settings and choosing the language to use for additional
instructions.
3. Press the
X color cleaning button to print a list of current settings
and additional instructions.
4. After you make the changes you want, turn the printer off to save
the settings. The settings remain in effect until you change them
again.
Setting Options
Print direction Auto, Bi-D, Uni-D
Font Courier, Roman, Sans Serif, Prestige,
Script, Roman T, Sans Serif H, Draft
Pitch 10 cpi, 12 cpi, 15 cpi, 17.1 cpi, 20 cpi,
Proportional
I/F mode Auto, Parallel, Serial, Option
Auto I/F wait time 10 seconds, 30 seconds
Software ESC/P 2, IBM X24E
Auto CR (IBM mode only) Off, On
AGM (IBM mode only) Off, On
Character table PC437, PC850, PC860, PC861, PC863,
PC865, Abicomp, BRASCII, Roman 8, ISO
Latin 1, Italic U.S.A., Italic France, Italic
Germany, Italic U.K., Italic Denmark 1,
Italic Sweden, Italic Italy, Italic Spain 1
Auto line feed Off, On
Network I/F mode Off, On
Loading position 8.5 mm, 3 mm, Others
Economy Off, On
Parallel I/F transfer rate Fast, Normal
easapb.fm5 Page 7 Tuesday, January 14, 1997 9:54 AM