Managing Print Jobs and Network Printing
4-12
5. Click the
Add Port button, then specify the network path
to the printer and click OK.
6. Open the Spool Manager window as described on page 4-2.
7. In the Spool Manager window, double-click your printer’s
queue. The Queue Setup dialog box appears.
8. Make sure the
Use Print Manager for this port option is
checked. Then click OK.
Network Printing on a Macintosh
If you want to use your printer on an AppleTalk
™
network, you
need to install one of the optional interface boards: either the
LocalTalk
™
board or the Ethernet
™
board. See Appendix A for
more information about optional interfaces.
Then you can use the
EPSON Namer utility and set up your
printer in the Chooser. The
EPSON Namer was installed on
your hard drive along with the other printer software.
Assigning a Name to the Printer
Follow these steps to use the EPSON Namer utility:
1. Double-click the
EPSON Namer icon on your hard drive.
2. Click the
EPSON Stylus(AT) icon in the Device Types
window.
3. Select the zone where your printer is located.
4. Under
New Name, type a name from your printer to
distinguish it from other printers on the network.
5. Click
Rename and then click Done.
easch4.fm5 Page 12 Tuesday, January 14, 1997 9:51 AM