EPSON Printers Supported by the Ethernet Card
The EPSON Ethernet Card can be installed in a variety of
EPSON laser and dot-matrix printers.
Check your printer documentation for a list of optional
interfaces that can be installed in your printer, or check with
your local EPSON dealer. If you are using an optional
LocalTalk interface, see your interface manual for information
on compatibility.
Overview
This manual describes how to install, configure, and use your
Ethernet Card in a variety of network environments using the
following cable connections:
0
Ethernet Twisted-Pair (10BASE-T)
0
Ethernet Thin Coaxial (10BASE2)
Installation of the Ethernet Card in your printer is simple and
is described in Chapter 1. The following steps provide an
overview of the installation process.
1.
Install the Ethernet Card in your EPSON printer and connect
it to the network as described in Chapter 1.
2.
Follow the instructions for your network environment.
Cl
Novell NetWare: see Chapter 2 for information on
using EPSON Net! for NetWare.
Cl
Apple Macintosh
®
:
see Chapter 3 for details on using
an Apple EtherTalk network and the EPSON Zoner
and EPSON Namer utilities.
4 Introduction