Filter
Top Products
The following are examples of commands that can be added to
the STARTUP.CMD:
RPRINT3 10900416/LPT1
RPRINT3 10900701/LPT2
RPRINT3 1090328F/LPT3
RPRINT3 10903605
Causes print files directed to LPT1 to be
received by an interface with the serial
number 10900416.
Causes print files directed to LPT2 to be
received by an interface with the serial
number 10900701.
Causes print files directed to LPT3 to be
received by an interface with the serial
number 1090328F.
Causes print files directed to LPT1 to be
received by an interface with the serial
number 10903605.
6.
Re-boot the LAN Server file server and make sure the driver
starts successfully.
All printed output spooled to this file server will be redirected
to the remote printer interface specified above.
Getting printer driver status information
To make sure the remote printers are working, type RSTAT3 at
the OS/2 command prompt. RSTAT3 will return a one line
status report for each printer driver served. For example:
ITC Remote Print Servers active for LPT1-Printer Ready
or, if the printer driver is busy, it returns the following if only
one port is selected:
ITC Remote Print Servers active for LPT1-Printer Busy
Using OS/2 6-3