Filter
Top Products
Notice for Ethernet Card Users
Using OS/2
If the Ethernet Cards firmware version is 4.00 or
below, it does not support NetBIOS over TCP/IP
protocol. Therefore use the NetBEUI protocol provided
by OS/2 Warp or OS/2 Warp Connect.
The following programs are not supported in the
NetBIOS over TCP/IP protocol:
RPRINT, RSTAT-LPT redirection
REMPRT, REMSTAT- pipe support
Using Apple EtherTalk-Renaming Your Printer
When the Card is installed in some printers and you
use Epson Namer to rename the printer, the original
factory name may reappear in the Select Printer list.
Rename the printer again and this name will be
properly saved.
Copyright © 1996 by Seiko Epson Corporation,
Nagano. Japan
Printed in U.K. 96.9-5
4006276
EH3-01