Entering the password
A password is not required for Ethernet Card operation.
However, if you wish to connect to a restricted file server, you
will need to use EPSON Net! to enter the encrypted password.
To enter the password, follow these steps:
1.
From the NetWare config dialog box, click
Password.
The
following dialog box appears:
2.
Type in the same password that you used to log on to the file
server and click
OK.
e
Caution:
Once you make changes to the Ethernet Card, you must wait
for at least five minutes before turning off or rebooting your
printer.
Setting the queue polling time interval
Use EPSON Net! to change the interval at which the parallel
port(s) check queues for waiting print jobs. To reduce network
traffic, you can change the polling interval from 1 second up to
90 seconds. The default setting is 5 seconds.
Using Novell Net Ware
2-11