Filter
Top Products
Changing the port number
Use the EPSON Net! utility to change the parallel port number
for the remote printer as follows:
1.
In the NetWare config dialog, enter the number for any
available port in the Port No. box. The available settings for
Novell NetWare versions 3.x and below are from 0 to 15.
For NetWare 4.x and higher, the available settings are from
0 to 254.
2.
Click
Save
to save the port setting.
Enabling/disabling Hunting
You can use EPSON Net! to turn the Ethernet Card’s Hunting
feature on or off. When Hunting is on, the interface card
connects to the first available unassigned active port. This
feature is useful if the Novell print server has many printer
ports. To change this setting, follow these steps:
1.
In the NetWare config dialog, click
On
under Hunting to
enable the function. The default setting is Off.
2.
Click
Save
to save the setting.
Using Novell Net Ware
2-15