1.
From the NetWare config dialog, enter a value, in seconds,
from 1 to 90 in the Poll Time (sec) box.
2.
Click
Save
to save your setting changes.
e
Caution:
Once you make changes to the Ethernet Card, you must wait
for at least five minutes before turning off or rebooting your
printer.
Using the Ethernet Card in Remote Printer Mode
Before using an Ethernet Card as a remote printer, you must
define it using PCONSOLE on any Novell print server. When
defined, the remote printer may have its printer port defined,
such as LPT1 or COM2. However, to maintain compatibility,
you should define a remote printer as LPT1.
Defining the Ethernet Card
Before using the EPSON Net! setup utility to install the
Ethernet Card as a remote printer, you must do the following:
1.
From any NetWare workstation, log on to the network with
supervisor privileges.
Note:
If you use Net Ware 4.x, menu screens will differ slightly and
Bindery Emulation has to be selected. Press F4 to switch between
Directory Services and Bindery Emulation.
2.
Type
PCONSOLE
at the DOS prompt.
3.
From the Available Options screen, select
Print Server
Information.
Next, select the print server name from the
Print Servers list and press
Enter.
2-12
Using Novell Net Ware