Filter
Top Products
Note:
It takes a few seconds to register the IP address change, so there
may be a short delay before it is displayed.
Configuring your printer
Follow the steps below to configure your printer using
Windows NT.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Click
Print Manager
in the Main program group.
Choose the
Create Printer
command from the Printer menu.
After the Create Printer dialog box appears, enter the name of
your printer in the Printer Name text box.
Choose your printer driver from the Driver pull-down menu.
Choose
Other
from the Print To pull-down menu.
After the Print To dialog box appears on the screen, select
LPR Port
from the Available Print Monitor list, and click
OK.
After the Add LPR-compatible Printer dialog box appears on
the screen, enter the previously specified IP address of the
Ethernet Card in the first text box.
Click the Printer Name of the Computer text box; then enter
an appropriate printer name, and click
OK.
After the Create Printer dialog box, appears, make sure that
all your settings have registered and are correct. Make
changes if necessary, and click
OK.
You can change the printer driver settings from the Create
Printer dialog box at any time.
Using Windows NT
4-7