Filter
Top Products
Using EPSON Zoner
Some EPSON PostScript printers cannot automatically switch
between AppleTalk and non-AppleTalk PostScript printing
environments. Therefore, you must first configure your printer
for the correct printing environment with the AppleTalk PS
option in the EPSON Zoner utility. EPSON Zoner
automatically displays the AppleTalk PS option if your printer
does not have an automatic switching feature.
Follow these steps to configure the AppleTalk PS printing
environment and select a zone for your printer:
1.
Make sure the Ethernet Card-equipped printer is turned on
and ready. After turning on the printer, it will take about a
minute for initialization.
2.
Insert the EPSON Net! for Macintosh disk into your
computer. Double-click the disk icon to open it, if
necessary.
3.
Create a new folder for EPSON Zoner, if desired, and then
copy the utility to your Macintosh.
4.
Double-click on the new folder to open it. Next, double-click
the
Epson Zoner
icon. After searching your network,
EPSON Zoner displays the following screen:
Using Apple EtherTalk
3-7