Note:
Cl
To set up and use the card through a shared OS/2 print
queue(s) that will receive print jobs from other workstations,
you
must
install
and select either the
IBMNULL
or
MSNULL printer
driver. For the
DEVICE
to
connect
to,
choose a port name from those added in step 3 above (for
example,
EPLASER).
Cl
To connect
the card directly to a workstation(s), you must
install the proprietary OS/2 printer driver.
5.
In the EPNET remote print service directory, create an
initialization file called REMPRT.INI. This file is used by
the remote print service at start-up and assigns the remote
printer names to the device port names. The format of the
file is as follows:
<serial number> <device port>
Example:
10900701 EPLASER
10900416 PUBSPRT
6.
Edit your STARTUP.CMD file and add the following line at
the end:
\EPNET\REMPRT3@REMPRT.INI
This line ensures that the remote print service is initialized
each time you start the server. If you wish to start the print
service manually, you can execute the REMPRT3.EXE file
from the OS/2 command prompt.
7.
Use the LAN Server Administration facility (NET ADMIN)
to add newly created printers to the list of shared resources.
6-6
using OS/2