Filter
Top Products
Using the Ethernet Card in Auto Print
Server/Remote Printer Mode
To use the Ethernet Card-equipped printer in Auto Print
Server/Remote Printer mode, you must configure it for both
print server and remote printer operation. For information on
changing the various print server and remote printer settings,
see the appropriate sections earlier in this chapter. To select the
Auto Print Server/Remote Printer mode, follow these steps:
1.
First make sure the host printer is turned on and the
interface is connected to the network.
2.
Log on to the selected file server with supervisor privileges.
3.
Run the EPSON Net! utility.
4.
Select the printer you wish to configure and click
Open.
5.
Click
Edit
to open the NetWare config dialog box.
6.
Click the
Auto PrintServer/Remote
option button under
Operating Mode to select auto switching mode.
2-16
Using
Novell Net Ware