Note:
cl
cl
9.
If you have installed several printers of the same type on the
network, they may all have the same name in the Select Printer
list. To differentiate between printers, highlight a printer name
and then click
Identify.
The selected printer will print a page to
identify itself providing the printer name, type, and zone (if any).
Rename the printer and then repeat the process, if necessary, for
other printers on the network.
Clicking
Reset
returns the printer to its default name. For
example, “EPSON.”
Click
Done
to exit EPSON Namer.
After changing printer names, you will need to notify everyone
on the network of the new names. Network users will then
have to reselect the renamed printer with the Chooser.
Selecting a Zone with EPSON Zoner
A zone is a group of users, computers, and devices, including
printers. Zones can be grouped according to physical location,
work groups, or departments. For example, Zone 1 could
contain all of the printers used by a company’s marketing
department or publications group.
Use the EPSON Zoner utility to assign your printer to a specific
zone on a Phase II EtherTalk network.
Note:
EPSON Zoner cannot be used on a Phase I network.
3-6
Using
Apple EtherTalk