Filter
Top Products
4.
Select the correct serial numbers for the Ethernet Card from
the list shown in the dialog box; then click Open. The IP
Config dialog box appears on the screen and shows the
current IP address.
5.
Set the following options in the IP Config dialog box:
0
IP address: determine and assign an IP address
Cl
Subnet mask: assign the subnet mask
Cl
Auto IP address: set to Off
Note:
Cl
The Auto IP address option is a function designed
specifically for UNIX users. Windows NT overrides this
function, so you can leave it off.
0
To prevent the assigned IP address from changing
unexpectedly in UNIX, UNIX users should set the Auto IP
address
option off.
‘Auto
IP
address
i
0
On
0
Off
1
Serial
No.
104676F9
IP
address
11.22.33.44
Subnet
mask
255.255.0.0
6.
After making your settings, click the
Save
button. To change
these settings, repeat steps 3 through 5.
4-6
Using Windows NT