Filter
Top Products
A
remote printer
is a shared printer connected elsewhere on the
network, but under the control of a NetWare print server.
Traditionally, a remote printer is connected to a network
workstation running NetWare’s RPRINTER, but the Ethernet
Card can also function as a remote printer.
A
status sheet
prints each time the
Status Sheet
button of the
Ethernet Card is pushed. If the Card is installed as a print
server, the status sheet lists the configurations of the Ethernet
Card on each network.
EtherTalk
is AppleTalk’s communication protocol governing
Ethernet transmissions.
A print spooler is an application that places print jobs or
requests in a queue.
TCP/IP (Transmission Control Protocol/Internet Protocol) is a
layer of protocols that provides communications between
nodes on a network.
ftp
is a TCP/IP application protocol for file transfer.
lpd
is a TCP/IP remote printing protocol application,
Resetting
the Ethernet Card causes it to initialize. You can reset
the Ethernet Card in the following ways:
0
Switching the EPSON Ethernet Card-equipped printer off
and back on again.
0
Using the reset function or buffer clearing operation from
the control panel of your EPSON printer.
6 introduction