Filter
Top Products
ftp (Form feed)
The Ethernet Card will append a form feed to the end of the
print job if the destination file is given the name of “FEED” or
“feed.” For example, to send a text file called “txtfile” to the
Ethernet Card in ASCII mode and append a formfeed, use the
following ftp commands:
ascii
send txtfile feed
lpr filters
Filters for lpr are controlled by the name given to the remote
printer. When setting up an lpr printer entry, a name is entered
for:
0
the local printer name to be redirected
0
the host name of the station to which the print is sent
0
the remote printer name (name of the printer port on the
remote station).
It is this last name that the Ethernet Card uses to determine
which filters to use.
Many different remote printer names may be set up, all
directed to the same Ethernet Card remote host, and each is
given a different local printer name to be redirected. Different
types of print jobs may thus be sent to different printer names,
which will then all print out on the same printer, through the
same Ethernet Card interface, but using different filters.
Using UNIX 5-7